How to remove the monitor base

The bottom of the LCD monitor is mainly divided into two parts: the base and the shaft. The disassembly is relatively simple. Start from the base. The following are the specific steps:

a. Remove alkali

How to remove the base of the Great Wall Display_How to remove the base of the Great Wall Display

1. First, place the LCD monitor flat on the table. Please note that the workbench must be flat and there is no debris on the desktop to avoid knocking down and damaging the LCD screen. Of course, if you can put some sponge or other flat soft things on the bottom, so much the better.

2. Normally, the base of the monitor does not use fixing screws. Just press the buckle of the monitor base and press it down firmly. Then you can remove the bottom of the monitor.

How to remove the base of the Great Wall Display_How to remove the base of the Great Wall Display

[Note]: The design of different display bases is also different, and not all display bases can be squeezed tightly. Some may also have fixing screws. Before disassembling, you must observe the structure of the monitor base and disassemble it after understanding its principle.

b. Disassemble the shaft

After removing the base, the next step is to remove the shaft. Specific steps are as follows:

How to remove the base of the Great Wall Display_How to remove the base of the Great Wall Display

1. First remove the buckle cover on the shaft.

2. You can see that the inside of the shaft is usually fixed by multiple screws. Here, we need to remove the fixing screws, and then the shaft can be easily removed.

The editor takes its own computer monitor as an example, and introduces in detail the method of removing the LCD monitor base. Of course, the design of different monitor bases may be different, but in general, they are not too complicated. What you need to do is to learn from each other and enhance your hands-on and analytical skills.

More about:monitor desk mount dual arms