How to choose a computer display stand

see product performance
The performance of the monitor stand mainly depends on the rotation angle. First, it depends on whether the monitor can be rotated at will, whether it can provide the angle presented by looking down or looking up, and then look at the angle at which the bracket arm rotates around the bracket pillar, and how far the bracket cantilever is stretched. Finally, look at the effect of fine-tuning the monitor stand. The center of gravity of individual monitors is not necessarily in the center of the screen, so it may fall to one side during installation. Fine-tuning ensures that the screen doesn't tilt.
see product material
Most of the bracket products on the market are made of aluminum alloy or cast iron materials, which are sturdy and durable.
If you consider long-term use, it should be noted that all metals will be deformed. Some metals can be restored to their original shape after deformation, while others are permanently damaged. In terms of price, cast iron products are cheap, while aluminum alloys are relatively expensive.
see product appearance
The appearance of the monitor stand is also one of the factors that affect the purchase.
If the display stand has a beautiful appearance and a reasonable space structure, it can not only meet the user's practical requirements but also be a product worthy of the user's collection. Therefore, in the selection of appearance, attention should be paid to whether the surface of the product is smooth, whether the occlusion of the contact point is complete, whether the wiring is hidden, whether the design is beautiful, etc.
see product range
Generally speaking, the monitor stand will have the parameters of the product itself and the scope of use. Therefore, in this selection, it can be measured according to the implementation requirements.
1) There are four holes on the back of the display, the current international standard hole is 75x75mm or 100x100mm. This standard is used on the monitors of existing mainstream models.
2) From the selection of the size and weight of the display. The monitor size is roughly divided into two types: within 27 inches and above 27 inches. Most of the below 27 inches are desktop-based. Most of the brackets above 27 inches are wall-mounted or suspended. The weight is based on the fact that 0~10kg is ly desktop type, and more than 20kg is ly wall-mounted.
3) Choose whether the bracket is a single-screen bracket, a dual-screen bracket, or a multi-screen bracket according to the number of displays.
4) The thickness of the desktop should be taken into consideration when purchasing desktop stand products. If the desktop is too thick or too thin, it will affect the fixation of the product. The thickness of the desktop is between 5~70mm. It can also be used as a reference according to the clamp value provided by the product.
see product installation
Due to its special design, the monitor stand can support installation in a narrow space and can be purchased according to the actual installation location. The installation methods provided by the monitor stand include clip table type and through table type. Wall-mounted, suspended.