EN
English
Español
عربىProduct Consultation
Your email address will not be published. Required fields are marked *
Everyone may not be aware that LCD TVs can actually be installed with mobile brackets. In this high-tech era, mobile TV bracket surgery is a very popular family device today. The characteristics are very high. If you want to install a mobile TV How does the machine stand work?
1. First fix the mobile TV stand and install the hanger
To accurately locate the installation part of the flat-screen TV on the installation surface, fix a part of the mounting surface hanger to ensure that the flat-screen TV is firm, the center of gravity is stable, and the upper and lower flatness is less than 1 degree apart. The metal structure needs to be solidly welded by electric welding or the edge connection needs to be solved by anti-rust treatment.
2. Prevent scratches on the display
Flat-screen TVs are relatively "soft", and if you are not careful, it is very easy to cause physical damage to the surface, such as bright spots caused by damage to fine lines and equipment on the display. Therefore, you need to be cautious in the whole process of installing the LCD TV bracket. When moving the whole device, you should handle it with care, and you should prepare foreshadowing in advance to avoid scratching the display.
3. Adjustment of mobile TV stand application level
After the monitor is offline, use a spirit level to measure it accurately, and adjust the screws of the hanger so that the monitor is completely at the level. The translation and transformation deviation of the entire equipment part installed on the flat-screen TV should be less than one centimeter, and the deviation of the upper and lower slopes should be less than 1 degree.
4. Connection of other components
If the monitor has a connection with the audio and mounting bracket, pay attention to distinguishing the upper and lower sides and the front and back. When connecting the speaker cable, you should pay attention to the positive and negative of the speaker cable to prevent the left and right channel sound from being out of phase. The switching power supply route should be equipped with protective equipment such as an air leakage switch, and the length of the power plug and the wiring of the power cord should not be arbitrarily changed. To extend or change, you should use cables that meet the regulations.
